User`s manual

BD2-1220/1221 User’s Manual
3
2.2 Basic Specifications
Model
Item
Print method
Paper width/printable
area width
Total number of dots
Dot density
Print speed
Paper feed span
Number of print
columns
Character size
Character type
Logo registration/print
Types of bar code
Line spacing
Interfacing
Input buffer
Sensors
Supply voltages
Current consumption
Thermal paper
Operating temperature
and humidity
Storage temperature and
humidity
Outside dimensions
Weight
BD2-122xU
Line thermal dot print method
LT-122x: Paper width: 58mm Printable area width: 54mm
LT-132x: Paper width: 80mm Printable area width: 72mm
LT-122x: 432 dots/lines
LT-132x: 576 dots/lines
8 dots/mm
MAX. 640 dot lines/sec
0.125mm
LT-122x: Font A: 36 columns Font B: 48 columns
LT-132x: Font A: 48 columns Font B: 64 columns
Font A: 1.25 × 3.00mm Font B: 0.88 × 3.00mm
Alphanumeric, International characters, symbols, Code 437, 850, 852,
857, 860, 863, 865, 866, Windows code, Katakana
Capable of registering user-defined characters and logos into flash
memory.
UPC-A/E, JAN (EAN) 13 columns/8 columns, ITF, CODABAR,
CODE39, CODE93, CODE128
4.23mm (1/6 inch) (Controllable with command)
Serial (RS-232C), Parallel (Centronics compliant)
4K bytes
Print head temperature, paper, head-up, and driving voltage sensors
Logic: 5V ±5% Approx. 200 mA (ANK slide printing)
Driver: 24V ±10% 0.7 A on average (For 12.5% of print area)
Print head: Approx. 5.2 A max. (for simultaneous 288-dot driving)
Approx. 0.52 A on average (For 12.5% of print area)
Motor: Approx. 0.4 A max. (Mean head resistance at 25°C and 640 pps)
Approx. 0.14 A on average
Thermal paper/thermal roll paper
Paper width: 58 mm (80mm) +0, –1mm
Paper thickness: 60 to 150 µm (Depending on mechanism)
5 to 40°C, 35 to 85%RH (No condensation)
–20 to 60°C, 10 to 90%RH (No condensation)
90mm (W) × 65mm (D) × 20mm (H) (See the outline drawings.)
Approx. 40g (Control Board only)