Instruction manual

Printer Type Generic Generic ASCII printer
Citizen/Epson Use the special features of these
printers.
Star Micronics Use Star control codes
Ithaca 70 series Use Ithaca control codes
Use Date & Time Yes/No Should the date and time be printed.
12 or 24 HR Clock 12/24 Time be in 12 or 24hr format
Auto Adjust for DLS Yes/No Should the unit auto adjust for
U.S. Daylight Savings Time
Use Custom Header Yes/No If a location specific header has been
programmed, should it be used.
Multi-voucher Mode Yes/No Also called the ticket mode, if set
to yes the unit will print one voucher
for every trip point reached. Not
recommended for low value trip
points.
What Should the Voucher Money Print in dollars/cents.
be printed in. Points Print the amount in points.
Credits Print the amount in credits.
Tickets Print the amount as tickets.
SPECIAL NOTE : If you set the printout in Tickets and the Money Value to cents,
the unit will go into the “NOTHING” mode. The value of the
Ticket will not have any value before or after it, just a plain
number. (V1.60 or better)
If money dollars Dollars The value is in whole dollars.
or cents Cents The value has fractional dollars.
Customer Signature area Yes/No Print an area for the customer to
sign when redeeming the voucher.
Locality Specific Information These settings are constantly in flux, but there
will always be a NONE ,USER, and CUSTOM
setting. NONE means just that, USER is to
print information that is entered by the operator,
and the CUSTOM setting is reserved by us. Any
other settings on your paperwork are to print the
data in such a manner to be more acceptable in
that area.
4