Instruction manual

PIN Setter
Instructions
The PIN Setter prototype is easy to set up. Take the 3' CAT5 cable and
use it to put the unit inline with the base unit, connect the printer to the PIN
Setter using the DB-9 to DB-25 printer cable, and plug in the power
transformer. That’ all there is to it. Inside the Mutha unit you must set the
switches for proper operation. If you are using a CIAO Baby (Credit Unit)
and you want it to print PINs on remote credits turn Bank 2 Number 7 ON
and if you want it to print PINs on money into the game’s DBA turn Bank 2
number 8 ON.
The PIN IC’s are located inside the unit in a ZIF socket that uses a small
screwdriver to turn the release. They are marked H and L and are compatible
with our F1_Pin boards.
PIN Setter V1.00
Description Value 1 2 3 4
Printer
Type
GENERIC 0 0 0
Citizen/Epson 1 0 0
Ithaca 70 0 1 0
Star 1 1 0
ESC/POS 0 0 1
TG-558 1 0 1
N/U 0 1 1
N/U 1 1 1
Loop
PINs
NO 0
YES 1
Jumper Settings :
JMP1 OFF = $1 PINs
ON = $5 PINs
JMP2 NOT USED
11