User's Manual

SELECTING CHANNEL
During conversation, you might need to manually channel in order to get rid
of static. Press “CH.” button to seek clear channel.
T/P DIALING SELECTOR
You can choose the type of dialing by selecting TONE/PULSE mode.
OPERATION
RECEIVING CALLS AS A NORMAL TELEPHONE
When you phone ringing.
1. Pick up the handset and press TALK button to receive calls.
2. When conversation is over press TALK button to release line.
MAKING CALLS AS A NORMAL TELEPHONE
Method 1.Normal dialing
1. Press TALK button and dial the number you want to call.
2. Press TALK button to release the telephone line when conversation is over.
Method 2 Pre-Dialing (On-Hook Dialing)
1. In the stand by state, dial the number you want to call. Press the FLASH
button to delete any wrong digit.
2. Press TALK button to dial out the number.
3. Press TALK button once again to finish conversation.
LAST NUMBER REDIALING
In the stand by state, press TALK button and then press the REDIAL button, the
last dialed-out number will be redialed out automatically.
NOTE: To redial after hearing a busy signal press FLASH and then press REDIAL
button.
FLASH FUNCTION
Press the FLASH button to terminate a call institute another call or to getting
another call from “call waiting”.
PAUSE FUNCTION
To dial a number from an automatic switch board system (PABX), you must first
dial an access code. Then pause a few second to wait for an outside line. The
“REDIAL” button stores a 2-3 seconds pause to give the automatic switchboard
time to find available outside line.
NAME BOOK FUNCTION OPERATION
STORE A PHONEBOOK ENTRY
1. In the stand by mode, then press “STORE” button, LCD will show “NAME” icon.
2. Use number key (2-9) to enter the name, press “0” button to enter space.
 You can press “FLASH” to clear any wrong letter and digit.
 For example, if you wish to enter the name ‘DAVE’:
a. To enter the letter D, press 3 once. To enter the letter A, press 2 once, the cursor
will automatically move to the right and display the letter. To enter the letter V,
press 8 three times. To enter the letter E, press 3 twice.
b. If the next letter you wish to enter is on the same button you have just pressed,
allow the cursor to move to the right before trying to enter it.
VIEWING PHONEBOOK ENTRIES
1. In the stand by mode, press STORE button, the LCD will show: “XX
memories”.
2. Press UP or DOWN button to enter review phone book entry.
3. You can key in a letter to search similar name data.
DIAL A PHONE BOOK ENTRY
1. In the stand by mode, press STORE button, the LCD will show: “XX
memories”.
2. Press UP or DOWN button to enter review phone book entry.
3. When the number you want to call is displayed on the LCD press “#” button,
the current number will be dialed automatically.
9 10