User guide

24
2.4 VOIP Configuration
User can configure specific parameters of SIP line on this page；Click Basic to set the
common parameters of SIP line selected.
Definition of each parameter described as below
SIP Line Select Select a line of SIP to configured,
then click load button to get ready to
set parameters
Registrar status
SIP register state；if register
successfully, show “Registered，
otherwise show different results
Server address Set SIP server IP address or Domain
Server Port Set SIP server signal port
Account/User Username Set SIP server account username
（Usually it is the same with the
config port number）
Password Set password of SIP server account
Phone Number Set assigned phone number
Display Name Set assigned SIP display name as
caller
Proxy Server Address Set proxy server IP address if SIP