User guide

If the system selects DHCP service in the network which is using DHCP service, IP

address will be gained dynamically.

If the system selects PPPOE service in the network which is using the PPPOE service,

then the IP address will be gained by the set PPPOE ISP

Current gateway IP, subnet mask, MAC address and current gateway IP:

Configure Mac Authenticating code, the phone don’t work if error code.

Select acquisition option; Configure way of IP for WAN; This is single static IP

parameter for WAN

Select “static”. These are must be filling

Select “PPPoE”. These are must be filling.

PPPoE Server: the name of ISP PPPoE server, we suggest don’t change if no especial

request.

2.3.2 LAN Configuration

User can make local area network (LAN) configuration on this page, when bridge

mode is selected, the local area network (LAN) configuration will no longer go into