Specifications

58
RF SOLUTION-CITEL
1-pair << 5-pin >> plug-in Surge Protector
DP80
The DP80 series is designed to protect large telephone
equipment (PABXs, central offices) against lightning surges.
This protection is based in hybrid protection diagram (gas
tube and diodes) and in K20 configuration (in compliance with
ITU-T recommendation K20).
The DP80 is a one-pair plug-in module that uses the 5-pin
configuration, and so can be adapted to CITEL TC99 and
similar 100-pair connector block.
TC99 100-pair MDF connector block allows the connection,
protection, and disconnection of up to 100 pairs in a small
volume, making it ideal for PABXs where space and effective
protection are both critical. Connection is performed by
Wrapping or IDC.
Compact 1-pair plug-in surge protector
Discharge current : 5kA @ 5 kA
<<
5-pin >>
configuration
100-pair MDF connector block : TC99
CITEL part number DP80-T DP80-K20 DP80-48D3 DP80-24D3 DP80-12D3 DP80-06D3
Application PSTN - ADSL PSTN - norme K20 ISDN-T0 / Telex Leased line RS232 RS422 / RS485
Max. line voltage 170 V 170 V 48 V 24 V 15 V 6 V
Minimum clamping voltage 190 V 200 V 60 V 30 V 20 V 10 V
Residual voltage
240 V 250 V 70 V 35 V 30 V 20 V
8/20
㎲
impulse - 5 kA
Nominal discharge current
5 kA 5 kA 5 kA 5 kA 5 kA 5 kA
8/20
㎲
impulse - 10 times
Type of diagram A C B B B B
End of life by sustained fault short-circuit Stop and reset short-circuit short-circuit short-circuit short-circuit
TC99 support
MDF connector block for 100 x DP80s - Wrapping/Wrapping (TC99-WW) or Wrapping/CAD (TC99-FW) - weight 2.8 kg
Characteristics