General Catalogue 1st edition RF Component RF Resistor RF Termination RF Attenuator C ITEL SPD(Surge Protector Device) application Modular AC Power Surge Protectors AC Surge Protectors Plug And Hard-Wired Units Telephone Industrial Network Data Network RF Surge Protectors Gas Discharge Tubes Miscellaneous Accessories SANKOSHA GDT (Gas Discharge Tubes) SHINKO GDT (Gas Discharge Tubes)
RF Component RF Resistor Attenuator Termination Dummy Resistor
SPD (Surge Protect Device) 2 Electrode (Lead Typr) 3 Electrode 2 Electrode(Non Lead Type) SMD
RF Component RF Resistor RF Termination RF Attenuator
RF SOLUTION-Cqtel RoHs 고주파용 고압 표면실장형 저항 CHIP POWER RESISTORS CQS SMD CQL LEAD ● 특성 ● Features CQS와 CQL은 정격전력 20W, 주파수는 DC-3GHz 이상에서 사용 5mm×2mm and 7mm×2mm small size 20W power chip resistors for RF applications. CQS are lead less, CQL have two beam leads. Strong terminals of CQS are prepared to extract heat from resistor chip to circuit board. CQL20 have back metal for heart extraction. CQS 20W power rating are available with beryllium free design.
● Ordering Information P/N TYPE TCR Resistance Tolerance Package CQS20B100 ohm F CQS72 C(50ppm) 100 ohm F (1%) (100pcs/Bulk) SMD CQL20A100 ohm F CQL52 C(50ppm) 100 ohm F (1%) (100pcs/Tray) Leaded ● Specifications Remarks and Performances 형명 Type 정격전력 RatingPower with Heatsink 저항값 Resistance 저항열전도계수 TC 허용오차율 Tolerance 정격주위온도 Rated Ambient Temperature 동작온도범위 Operating Temp Range 정격부하수명 Load Life Humidity Series Inductance Parallel Capacitance CQS20B 20W 50, 100, 150, 2
RF SOLUTION-Cqtel RoHs 고주파용 고압저항 FLANGE POWER RESISTORS CQR FLANGE ● 특성 ● Features FLANGE TYPE CQR은 정격전력이 10W-250W이며, 주파수는DC- RF and microwave resistors of 50 to 150ohm are with flange cooling, also applied for terminations in strip-line circuits. Long life and temperature stability are result with Ni-Cr thin film and super heat conductive ceramic substrates. Industrial RF power source, RF amplifier, radio transmitter, fixed transmitter of mobile systems and measurements.
● Dimensions(mm:표준공차) Type A B C D E CQR20FY 7.60 5.10 3.1 5.0 3.0 3.0 2.9 CQR40FY 13.0 6.35 3.1 9.9 - 6.8 2.9 CQR50F 20.3 5.70 3.1 14.2 - 8.5 3.2 CQR100F 20.3 5.70 3.1 14.2 - 6.3 3.2 CQR120F 20.3 5.70 3.1 14.2 - 8.9 CQR150F 20.3 5.70 3.1 14.2 - 8.5 CQR250F 25.0 9.53 4.6 18.42 - 9.6 ● Ordering F G H J K 1.5 0.8 2.2 1.5 0.8 2.2 1.5 1.5 2.6 1.5 1.5 2.6 3.2 1.5 0.8 2.2 3.2 1.5 1.5 2.6 3.2 3.0 3.0 4.
RF SOLUTION-Cqtel RoHs 고주파용 고압저항 FLANGE POWER TERMINATIONS CQT FLANGE ● 특성 ● Features FLANGE TYPE CQT는 DC-3GHz, 정격전력은 20W-250W이며, 저항 RF and microwave termination of 50ohm are with flange cooling. Low return loss, long life and temperature stability are result with Ni-Cr thin film and super heat conductive ceramic substrates. Industrial RF power source, RF amplifier, radio transmitter, fixed transmitter of mobile systems and measurements. 값이 50 ohm인 터미네이션 저항입니다.
● Dimensions(mm:표준공차) Type A B CQT20FY.FX 7.6 5.10 CQT50F 20.3 5.70 CQT100F 20.3 5.70 3.1 CQTK60FX 6.35 13.08 6.43 CQT150F 20.3 5.70 CQT250F 25.0 9.53 ● Ordering C D E F G H J K 3.1 5.00 3.0 3.0 2.9 1.5 0.8 2.2 3.1 14.20 - 8.5 3.2 1.5 1.5 2.6 14.20 - 6.3 3.2 1.5 1.5 2.6 3.29 0.15 1 2.95 1.5 1 2.5 3.1 14.20 - 8.5 3.2 1.5 1.5 2.6 4.6 18.42 - 9.6 3.2 3.0 3.0 4.
RF SOLUTION-Cqtel RoHs 고주파 고압 표면실장형 종단저항 CHIP POWER TERMINATIONS CQT SMD ● 특성 ● Features DC-6GHz 주파수대역, 정격전력 5W-250W 까지 사용이 가능한 종단 High power surface mount termination for all of DC to 6GHz applications. Small sized and wide frequency range specifications are realized with large heat conducting AIN substrate. Sufficient mechanical strength metalization is from spattered thin film technology.
● Ordering Information Type TC Resistance Tolerance Terminal Bulk/Tape Remarks CQT05S50 ohmF CQT05S C 50 ohm F A Bulk CQT20S50 ohmF CQT20S C 50 ohm F A Bulk CQT50S50 ohmF CQT50S C 50 ohm F AB Bulk CQT100S50 ohmF CQT100S C 50 ohm F AB Bulk CQT250S50 ohmF CQT250S C 50 ohm F AB Bulk CQT00S75 ohmF CQT00S C 75 ohm F AB 주문생산 Ordering P/N ● Specifications and Performances Type CQT05S CQT20S CQT50S CQT100S CQT250S Rated Power (W) 5 Maximum Power (W) 10 2
RF SOLUTION-Cqtel RoHs 고주파 고압 표면실장형 종단저항 LEAD POWER TERMINATIONS CQT LEAD ● 특성 ● Features DC-3GHz에서 사용이 가능한 고주파 고전력 면실장형 리드 타입의 종 High power surface mount termination for all of DC to 3GHz applications. Small sized and wide frequency range specifications are realized with large heat conducting AlN substrate. Sufficient mechanical strength metalization is come from spattered thin film technology.
● Ordering Information TYPE TCR Resistance Tolerance Package Remarks CQT100LA50 ohmF CQT100LA C 50 ohm F Tray Bulk only CQT250LB50 ohmF CQT250LB C 50 ohm F Tray Bulk only Ordering P/N ● Specifications and Performances VSWR Heat 온도계수 Resistance Tolerance Resistance At 1GHz TCR Rating Power Max. Power CQT10LA 10W 25W 12.5C/W 1.15 CQT20LA 20W 50W 6.5C/W 1.15 CQT100LA 100W 2500W CQT150LA 150W 450W CQT250LA 250W 500W CQT100LB 100W CQT150LB CQT250LB 형명 PART 0.
RF SOLUTION-Cqtel RoHs SURFACE MOUNT HIGH POWER TERMINATIONS RFTSA, RFTSB ● 특성 ● Features DC-6GHz 고주파 표면실장형 터미네이션입니다. High power surface mount termination for all DC up to 6GHz applications. Small size and wide frequency range specifications realized with through large heat conducting AlN substrate. Sufficient mechanical strength metallization from spattered thin film technology.
● Ordering Information Type TC Resistance Tolerance Terminal Bulk/Tape RFTSA10C50 OhmFZ00 RFTSA10 C 50 ohm F Z00 Bulk RFTSB10C50 OhmFZ01 RFTSB10 C 50 ohm F Z01 Tape Reel RFTSA100C50 OhmFZ00 RFTSA100 C 50 ohm F Z00 Bulk RFTSA100C50 OhmFZ01 RFTSB100 C 50 ohm F Z01 Tape Reel RFTSA250C50 OhmFZ00 RFTSA250 C 50 ohm F Z00 Bulk RFTSA250C50 OhmFZ01 RFTSB250 C 50 ohm F Z01 Tape Reel Ordering P/N ● Specifications Remarks and Performances Type RFTS-10 RFTS-50 RFTS1
RF SOLUTION-Cqtel RoHs POWER ROD RESISTORS CQT ROD ● 특성 DC-3GHz 주파수대역에서 사용 가능한 50 ohm의 종단 저항입니다. 열전도율이 좋은 세라믹소자에 금속피막으로 제작되어 소형이고 광대역의 제품에 사용됩니다. 터미네이션의 발열은 저항기의 전극을 구조물에 접착시 켜, 단자로 연결된 부분에서 기판면으로 방열시키는 구조로 되어 있습니다. 정격전력은 1W-50W 까지 생산 가능합니다. ● 용도 SMA, N, 광대역 고주파증폭기, 아이솔레이터, 통신기기의 종단부 Dimension(mm:표준공차) CQT-SMA-50ohm F A 3.03 ± 0.05 B 1.23 ± 0.05 C 0.9 ± 0.05 D 1.66 ± 0.05 E 1.28 ± 0.05 CQT-N-50ohm F 10.52 ± 0.1 5.92 ± 0.2 2.3 ± 0.18 3.58 ± 0.05 2.95 ± 0.
DISK TERMINATIONS RF POWER RESISTOR CQD ● 특성 ● Features 저항값이 50 ohm인 고주파용 원판형 저항기입니다. Disk resistor for high frequency termination. Easy to Integrate in coaxial connector and to printed circuit board, and an high performance termination can be realized. Thin film with excellent heat conductivity substrate, high 155 C temperature operation, low +/-25ppm/K TCR, +/-1% tolerance and original spoke-trimming makes excellent stability and long life.
RF SOLUTION-Cqtel ● Ordering RoHs Information Type Ordering P/N Input resistance Input resistance Input resistance TC Tolerance Code CQD030E50RFZ00 CQD030 E (+/-25ppm/K) 50 ohm F (+/-1%) Z00 CQD048E50RFZ00 CQD048 E (+/-25ppm/K) 50 ohm F (+/-1%) Z00 CQD078E50RFZ00 CQD078 E (+/-25ppm/K) 50 ohm F (+/-1%) Z00 ● Specifications and Performances PART TYPE CQD016 CQD027 CQD030 CQD048 CQD078 CQD099 정격전력 Rating Power (Watts) 0.5W 0.5W 0.5W 1.0W 1.
고주파 고압 표면실장형 감쇄기 CHIP POWER ATTENUATORS CQA-545DD ● 특성 ● Features CQA545DD는 DC-6GHz, 전력 1W-5W, 고주파대역에서 사용가능한 4GHz-1W surface mount small sized attenuators of 50 ohm characteristic impedance. CQA545DD 4GHz-1W power and high durability against pulse / EMI accidents in small signal applications. Face down configuration on strip line show better return loss characteristics Long life and temperature stability of thin film technology realize better performance at temperature range from -55C to +155C.
RF SOLUTION-Cqtel RoHs SURFACE MOUNT RF POWER ATTENUATORS RFAS, RFAL ● 특성 ● Features RFAS는，표면실장형 타입으로 DC - 3GHz 주파수 대역에서 사용이 RFAS and RFAL, 3GHz-100-150W surface mount small size attenuators of 50ohm characteristic impedance. RFAS (attach to heart sink directly) small size power attenuator, Pb free / no BeO configuration, RFAL has durable power consumption in power isolators and circulators.
● Ordering Information Ordering P/N Type Balanced Circuit Characteristic Impedance Attenuation Tolerance of Impedance Rating Power RFAS100DD20dBGZ00 RFAS100 (D) 50ohm(D) 20dB G (2%) 100W RFAS120DD40dBG000 RFAL120 (D) 50ohm(D) 40dB G (2%) 120W RFAS150DD20dBGZ00 RFAS150 (D) 50ohm(D) 20dB G (2%) 150W RFAL100DD10dBG000 RFAL100 (D) 50ohm(D) 10dB G (2%) 100W RFAL120DD20dBG000 RFAL120 (D) 50ohm(D) 20dB G (2%) 120W RFAL150DD40dBG000 RFAL150 (D) 50ohm(D) 40dB G (2%)
RF SOLUTION-Cqtel RoHs SURFACE MOUNT RF CHIP ATTENUATOR CQA44DD ● 특성 ● Features CQA44DD는 주파수대역 DC-5GHz, 정격전력 1W인 칩 어츄네이터입 5GHz-1W surface mount small size attenuators of 50ohm characteristic impedance. CQA44DD 5GHz-1W power and high durability against pulse / EMI accidents in small signal applications. Long life and temperature stability of thin film technology realize better performance at a temperature range from -55C to +155C.
방송국, 기지국 공장, 산업시설 25
RF SOLUTION-Cqtel 전산실, IBS빌딩 26 RoHs
CITEL SPD(Surge Protector Device) application Modular AC Power Surge Protectors AC Surge Protectors Plug And Hard-Wired Units Telephone Industrial Network Data Network RF Surge Protectors Gas Discharge Tubes Miscellaneous Accessories
RF SOLUTION-CITEL Gas Discharge Tubes These components are made of two or three electrodes in an enclosure filled with a (non-radioactive) rare gas at a controlled pressure. The enclosure is a ceramic tube with its ends closed off by metal caps that also serve as electrodes. Their main use is to protect telecommunications lines, but other uses are possible.
Gas Discharge Tubes ● Discharge current This depends on the properties of the gas, the volume, and the material and treatment of the electrodes. It is the major characteristic of the GDT and the one that distinguishes it from other protection devices (Varistor, Zener diode, etc.): 5 to 20kA with an 8/20㎲ impulse for the standard components. This is the value the device can withstand repeatedly (say for ten impulses) without destruction or alteration of its basic specifications.
RF SOLUTION-CITEL RF Protector의 종류 1. 적용 방법에 따른 분류 구분 1) 용도 2) 입,출력 DC Block Type DC Pass Type Bias-T Type Coaxial Cable을 통해 dc 전원을 공급하지 않는 System에 적용 Coaxial Cable을 통해 dc 전원을 공급하는 System에 적용 RF Protector의 Center Pin을 통해 dc 전원이 공급됨 Coaxial Cable을 통해 dc 전원을 공급하는 System에 적용 RF Protector의 전원 공급 단자를 통해 dc전원이 공급됨 RF Protector Center Pin의 입,출 력이 분리 되어 있어도 상관 없다. RF Protector Center Pin의 입,출 력이 전기적으로 상호 연결 되어 있 어야 한다. RF Protector Center Pin의 입,출 력이 분리되어 있어도 상관 없다. 3) 회로도 2.
Din Rail AC Power Surge Protectors DS Surge Protectors CITEL DS AC power Surge Protective Devices (SPD) are designed to meet all surge protection needs for low voltage installations. Designed for mounting on DIN rails, these protectors are easy to install in standardized panels and cabinets and are equipped with thermal disconnection devices and indicators allowing total operating safety.
RF SOLUTION-CITEL ● VG technology by CITEL In order to improve the surge protection efficiency, CITEL has developed a patented technology which combines high energy varistor (MOV) network and specific gas tube (GDT) : by this way, the <> Type 1 surge protectors (DS150VG, DS250VG, DUT250VG) can get higher performances in : - Protection level, - Life duration (due to the suppression of leakage current), - Continuous operation and power quality (no follow current) - End of life behaviour.
● Type 2 surge protectors Type 2 surge protectors are designed to be installed at the beginning of the installation, in the main switchboard, or close to sensitive terminals, on installations without LPS (lightning rods). These protectors are tested following the Class II test from IEC61643-11 or EN61643-11standards and based on 8/20 ㎲ impulse current injection.
RF SOLUTION-CITEL Surge protection installation ● Location DS surge protectors are installed as follows, according to their types : - Type 1 or <> : at the origin of the installation, in a separate box or on the main electrical panel, for efficient discharge of high lightning currents. - Type 2 or <> : at the origin of the installation, on the main electrical panel, so as to shunt lightning currents as directly as possible and thereby avoid coupling.
Din Rail Low Voltage Surge Protectors Choosing Surge Protectors CITEL’s line of AC power surge protectors is designed to cover all possible configurations in low voltage installations.
RF SOLUTION-CITEL ● Choosing the SPD technology DS surge protectors are based on Varistor (MOV) technology. Some versions use different electrical diagrams : - <> technology : this Gas tube-Varistor hybrib association, used in Type 1 SPD (DS150VG, DS250VG, DUT250VG), improves the protection level Up and the residual voltage Ures.
DS Series DS surge protectors are available in single phase and 3-Phase versions. They can be chosen in several configurations : monobloc, multipole, prewired in panels....
RF SOLUTION-CITEL DSsurge protectors wiring ● Common mode protection (CT1connection) Common mode (L/PE) protection provided by DS surge protectors in relation with the different types of AC network. Called CT1 connection type in IEC 60364 std.
DS surge protectors wiring ● Common and Differential mode protection (CT2 connection) Common mode (L/PE) and differential mode (L/N) protection provided by DS surge protectors in relation to the different types of AC network. These configurations CT2 (following IEC 60364) are also called <<3+1>> mounting. ● Coordination of Surge Protector Example of coordination on 3-Phase network.
RF SOLUTION-CITEL DS surge protectors wiring ● Multipole Type 2 surge protectors wiring Wiring instructions for Multipole Type 2 surge protectors.
Type 1 surge protector Network DS250VG voltage 230/400V DS250VG-300 DS252VG-300 DS252VG-300/G DS253VG-300 DS254VG-300 DS254VG-300/G 120/208 V DS250VG-120 DS252VG-120 DS252VG-120/G DS253VG-120 DS254VG-120 DS254VG-120/G DS150VG DS250E DS150E Protection mode DS150VG-300 DS150VG-400 DS152VG-400 DS152VG-300 DS152VG-300/G DS153VG-300 DS153VG-400 DS154VG-400 DS154VG-300 DS154VG-300/G DS150VG-120 DS152VG-120 DS152VG-120/G DS153VG-120 DS154VG-120 DS154VG-120/G DS250E-300 DS252E-300 DS252E-300/G DS253E-300 DS25
RF SOLUTION-CITEL AC power Surge Protectors CITEL proposes a line of surge protectors for the singlephase AC network access of sensitive terminal equipment.
AC power Surge Protectors The Combined Surge Protectors Terminals connected to several networks, as communication terminals connected to telecom line and AC power network, are especially sensitive to surge voltages : during a lightning event, surge voltages will occur, in common mode, on AC network and telecom network. But transient voltages will appear also between these networks themselves : this phenomena will create disturbances or destructions in the telecom equipment connected on these networks.
RF SOLUTION-CITEL Telephone and data network surge protectors Introduction Telecommunications and data transmission devices (PABX, modems, data terminals etc..) are becoming increasingly vulnerable to lightning-induced voltage surges. These devices are becoming more complex and are currently connected to several networks : this situation increases the risk for these sensitive devices to be stressed by destructive surge voltages, induced by lightning or by electrical switching operations.
ensure efficiency on lightning surges. However, two additional parameters are to be taken into account: very low transmission voltage and high bitrate of the transmission. The CITEL surge protectors for data-processing networks are designed to fulfill these requirements. Interfaces, converters Probes Actuators Access control system Fire detection system Displays .... ● Mechanical Many standards of data transmissions (or fieldbus) are available on the market.
RF SOLUTION-CITEL International: - IEC 61643-21 : Tests of surge protectors for communication lines. - IEC 61643-22 : Choice/installation of surge protectors for communication lines. France: - NF EN 61643-21 : Tests of surge protectors for communication lines - Guide UTE C 15-443 : Choice/installation of surge protectors The site configuration : - Number of lines to be protected.
Protection diagrams 47
RF SOLUTION-CITEL 1 to 4-pair Surge Protection Boxes BP1, B280, B380, B480 The BP1, B280, B380, B480 units are designed to protect, against surge voltages, terminals connected to telephone or data networks. The electrical diagram is based on GDT and clamping diodes to guarantee a maximum efficiency. These boxes are available for 1 to 4 pairs : the protection printed circuit is removable for easy and fast maintenance (removable protection circuit S180.., S280.., S380.., S480..).
Dimensions (in mm) Electrical diagram (for 1 pair) 49
RF SOLUTION-CITEL DIN rail Surge Protector for dataline/telecom DLA, DLU, DLR Dimensions (in mm) DLA, DLU and DLR surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines. These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines : line voltage from 6 to 170 V, bitrate up to 10 Mbit/s.
Characteristics CITEL part number Application Configuration Max. line voltage (Uc) Max. line current Protection level (Up) 8/20㎲ impulse - 5 kA Nominal discharge current (In) 8/20㎲ impulse - 10 times Max.
RF SOLUTION-CITEL 2-pair plug-in Surge Protector E280 series Dimensions (in mm) The E280 concept is based on the use of plug-in modules to protect telecom and data lines. The E280 line covers all multi-line telephone (PABX) and data installation configurations: there is an E280 module and a suitable support for every type. E280 surge protectors use a high-speed 3-electrode gas discharge tube/clamping diode combination for a high discharge current capacity and a very short response time.
E280 series Surge protectors for telecom and data lines Characteristics CITEL part number Application Max. line voltage(Uc) Max. line current Max. frequency Minimum clamping voltage Protection level (Up) 8/20㎲ impulse - 5 kA Nominal discharge current (In) 8/20㎲ impulse - 10 times Max.
RF SOLUTION-CITEL Support for E280 plug-in modules BN , FPSU , MMP Muli-pair boxes and supports are designed to be equipped with E280 plug-in surge protector, in order to propose solution to each kind of existing multilines installations. 3 configurations are available : BN series : Metallic enclosures for wall mounting, when no existing panel is available on the network to install E280 surge protectors. Available in 8, 16 or 32 pairs.
Dimensions (in mm) 55
RF SOLUTION-CITEL 1,2 and 10-pair Surge Protectors for LSA+or IDC connection strip E1LSA, EBT, EBMI, E2BTI These surge protectors are designed to protect, from lightning surges, telephone equipment connected to the telecom network through a MDF equipped with connection strips. They are compatible with several types of connection strip standard : LSA+, CAD (France), Compact (Infra+).
Dimensions (in mm) Electrical diagrams 57
RF SOLUTION-CITEL 1-pair <<5-pin>> plug-in Surge Protector DP80 The DP80 series is designed to protect large telephone equipment (PABXs, central offices) against lightning surges. This protection is based in hybrid protection diagram (gas tube and diodes) and in K20 configuration (in compliance with ITU-T recommendation K20). The DP80 is a one-pair plug-in module that uses the 5-pin configuration, and so can be adapted to CITEL TC99 and similar 100-pair connector block.
Dimensions (in mm) Electrical diagram 59
RF SOLUTION-CITEL RF surge protection Protection of the radiocommunication equipment disturbances reduction (DC and lightning voltages) and high discharge current capability. Radiocommunication systems, connected to antennae, are especially exposed to lightning phenomena, the maximum risk being a direct strike on the antenna pole. Equipment, as GSM/UMTS or TETRA base stations, must consider this risk in order to insure a relevant service continuity.
Table below allows comparison between the 3 technologies of RF coaxial surge protectors, in order to select the right solution regarding the application and the requirements. Technology CITEL series Gas tube DC Block Quarter wave P8AX CXP-DCB PRC Principle Sparkover Sparkover + Filtering Adapted short-circuit/selective band filter Residual voltage from 70V to 600 V in relation with the dV/dt, then arc regime (shortcircuit of the line in the full bandwidth).
RF SOLUTION-CITEL RF Coaxial Protectors P8AX - PRC - CXP CITEL offers a comprehensive range of surge protectors designed for RF coaxial lines. Various technologies are available to comply the different uses and requirements. P8AX series The P8AX series is based on gas discharge tube (GDT) and designed for RF line surge protection. Available for different power and with coaxial connectors (N, BNC, TNC, UHF, SMA, 7/16, 7/8 cable), P8AX units could be provide in feedthrough mounting version (P8AX...
Characteristics* CITEL series Technology Typical application P8AX Gas tube RF transmission, GSM Bandwidth (fmax) 0 to several GHz Insertion losses @ fmax VSWR @ fmax Maximum peak power < 0,2 dB < 1,2 25 W : P8AX09.. 190 W : P8AX25..
RF SOLUTION-CITEL 2 - electrode Miniature Gas discharge tube 2 - electrode Gas discharge tube ● BA ● BB-BBS Dimensions(in mm) Dimensions(in mm) Characteristics Characteristics CITEL part number DC sparkover voltage (100V/s) Tolerance Impulse sparkover voltage (1kV/㎲) Holdover voltage (R = 330Ω in series RC = 150Ω/100nF in //) Insulation resistance (at 100Vdc or 50Vdc for*) Capacitance (at 1 MHz) AC discharge current (50Hz, 1s, 5 times) Nominal discharge current (8/20㎲, 10 times) Options 64 BA90*
2 - electrode Gas discharge tube ● BH-BHS Heavy Duty Gas discharge tube (High voltage series) ● P100 Dimensions(in mm) Dimensions(in mm) Characteristics CITEL part number DC sparkover voltage (100V/s)* Tolerance Impulse sparkover voltage (1kV/㎲) Holdover voltage (R = 330 ohms in series RC = 150 ohms/100nF in //) Insulation resistance (at 100Vdc or 50Vdc for*) Capacitance (at 1 MHz) AC discharge current (50Hz, 1s, 5 times) Nominal discharge current (8/20㎲, 10 times) Options BH600 BH800 BH1400 BH2500 B
RF SOLUTION-CITEL 2 - electrode Gas discharge tube ● CA8B 2 - electrode glass-metal Gas discharge tube ● CA5R Dimensions(in mm) Dimensions(in mm) Characteristics Characteristics CITEL part number CA8B*230 CA8B*250 CA8B*350 CA8BB-540 DC sparkover voltage 230 V 250 V 350 V 540 V (100V/s) Tolerance +/- 20% +/- 12% +/- 20% +/- 20% Impulse sparkover voltage <750V <750V <900V <1000V (1kV/㎲) Arc voltage < 20 V < 20 V < 20 V < 20 V Insulation resistance >1GΩ >1GΩ >1GΩ >1GΩ (at 100Vdc) Capacitance (at 1 MHz)
3 - electrode Miniature Gas discharge tube ● BM 3 - electrode Gas discharge tube ● BT Dimensions(in mm) Dimensions(in mm) Characteristics Characteristics CITEL part number BM90* BM230 BM350 BM500 DC sparkover voltage 90V 230V 350V 500V (100V/s) E/M Impulse sparkover voltage <700V <800V <1100V 1200V (1kV/㎲) E/M Insulation resistance >1GΩ >1GΩ >1GΩ >1GΩ (at 100 Vdc or 50 Vdc for*) Capacitance (at 1 MHz) <2 pF <2 pF <2 pF <2 pF Holdover voltage (R = 330Ω in series >60V >80V >80V >80V RC = 150Ω/100nF in /
SANKOSHA Gas Discharge Tubes
SOLUTION-SANKOSHA RoHs Two Electrode Gas Tube Surge Arrester Y-212B ● Features: UL 1449 Listed (File E96234) Non-Radioactive 100% Lead-Free (RoHS Compliant) Low Capacitance Proven Performance ISO 9001 Certified World Renowned Quality ● Applications: Transient Voltage Surge Suppression (TVSS) AC Line Input Protection Power Supplies CATV Systems Antennas Test Equipment Digital Satellite Systems (DSS) Electrical Characteristics 100 V/sec 2100 ± 20% 1. DC Breakdown Voltage 2.
Two Electrode Gas Tube Surge Arrester Y08SV-272B ● Features: UL 1449 & UL1414 Recognized (File E96234 & E165829) 100% Lead-Free (RoHS Compliant) IEC60950 Line Isolation 3.1 mm Internal Electrode Gap (Meets VDE Gap Requirement) ISO 9001 Certified ● Applications: Transient Voltage Surge Suppression (TVSS) AC Line Input Protection Power Supplies CATV Systems Antennas Test Equipment Set-top Boxes Electrical Characteristics 1. DC Breakdown Voltage 5KV/sec 2430 - 300V 2. 3.
SHINKO Gas Discharge Tubes
SOLUTION-SHINKO Surge Arrester P/N : AR2P23250X0000X0 2P-23 250V ● Dimensions ● Components Item 1 Description Electrode Material Nickel Alloy QTY 2 2 Ceramic Alumina 1 3 Ag Ring BAg 2 Stable breakdown voltage High insulation resistance more than 10,000MΩ Very low capacitance Superior life-time characteristic RoHS compatibility ● Applications ● Device Marking 2P-23 50K 2P-23 250K 06 06 ● General Product Series Nominal Voltage Shinko Symbol Mark Year of Production Features Ultra-fast r
Surge Arrester P / N : AR2P23202X0000X0 2P-23 2KV ● Dimensions ● Components Item 1 Description Electrode Material Nickel Alloy QTY 2 2 Ceramic Alumina 1 3 Ag Ring BAg 2 Stable breakdown voltage High insulation resistance more than 10,000MΩ Very low capacitance Superior life-time characteristic RoHS compatibility ● Applications ● Device Marking 2P-23 2K 06 2P-23 2K 06 ● General Product Series Nominal Voltage Shinko Symbol Mark Year of Production Features Ultra-fast response to surge v
