Owner`s manual

Page 25
Operating Instructions—Two Timer Model
OPERATING INSTRUCTIONS—TWO TIMER MODEL
1. After loading the dryer with water washed clothes, close the
loading door.
2. Turn the 60 minute drying (heat ) timer to the desired time.
The drying cycle light will be on.
3. Turn the 15 minute cooling (air) to the desired time. The
cooling light will come on after the drying finishes.
4. Select the temperature desired:
HIGH—185° (85° C) exhaust temperature, heavy fabrics
and hard to dry, (cottons and linens).
MEDIUM—150° (66° C) exhaust temperature, permanent
press, synthetic blends.
LOW—135° (58° C)exhaust temperature, delicate, sheer
fabrics.
5. Turn “on/off” toggle switch to “on” and press the “push to
start” button to start the drying and cooling cycles.
6. To shut the dryer off at any time during the cycles, switch the
“on/off” switch to “off”.
OPERATING
INSTRUCTIONS—
TWO TIMER MODEL