Owner`s manual

Page 35
OPERATING INSTRUCTIONS—TWO TIMER MODELS
OPERATING
INSTRUCTIONS—TWO
TIMER MODELS
OPERATING INSTRUCTIONS—TWO TIMER MODELS
(continued)
What is happening to the drying operation:
a. The fan motor will operate.
b. The basket will rotate.
c. The heat source will be energized.
d. The heated air will mix with the water washed clothes to
evaporate the moisture from the garments.
e. The thermostats will function to maintain a safe
temperature throughout the drying cycle.
f. The heat will be shut off and the motor will continue to
run to cool the dry load to a desired handling
temperature.
8. When the drying timer completes its time, then the cooling timer
will be energized and the cooling light will be “On”. When the
cooling timer completes its time, the cooling light will turn “Off”
and the “End-of-Cycle” light will be “On”. The “End-of-Cycle”
light will go off when the “Start/Stop” switch is turned to “Off” or
“O”. At the end of the cool-down cycle, the clothes load is dry.
9. To shut the dryer “Off”, move the “Start/Stop” switch to “Off”
or “O” position. This switch is a safety switch to immediately
stop the dryer's operation.
Special Reversing Feature—Set the “Reversing/Non-
reversing” switch to “Reversing”. See service manual for setting
of time of each reversal. Reversing of the basket is designed for
loads that twist (example—bed sheets and large mixed loads).
“Non-reversing” is for small or medium-size items that don't
twist.