Owner`s manual

Page 17
150 lb. Steam Heated Laundry Dryers - Specifications
Operating Steam Pressure 100 psig (6.9 bar) Maximum
Boiler HP 12.5 HP (9.33 kW)
Heat Capacity 8 Coil
Steam Coils (4) 6”(153 mm) x 10 1/4” (261 mm)
x 40 1/2”(1029 mm)
Steam Supply Connection 3/4” (20 mm)
Steam Return Connection 3/4” (20 mm)
Trap Connection (2) 3/4” (20 mm)
Maximum Air Displacement 2250 cfm (63.7 m³/h)
Motor No. Voltage Hz. Phase Amps BASKET or FAN
*MTR304 200-240/460-480 60 3 4.8/2.4 Fan or Basket
MTR100 575 60 3 2.0 Fan or Basket
*MTR304 240/415 50 3 4.8/2.4 Fan or Basket
*MTR304 220/380 50/60 3 4.8/2.4 Fan or Basket
*All MTR30X series motors have internal overload protection. In case of a trip, the overloads are resetable from a button located
on the main body of the motor.
Total controls on dryer are 1 to 3 amperes.
*Input ratings as shown are for elevations up to 2000 ft. (610 m). For
high elevations, ratings should be reduced 4% for each 1000 ft.
(305 m) above sea level.
Electrical wiring to dryer must conform to local electrical code re-
quirements.
GENERAL
SPECIFICATIONS FOR
150 lb. LAUNDRY DRYERS
(STEAM HEATED)
LIST OF MOTORS USED -
150 lb. LAUNDRY DRYERS
TOTAL CONTROLS
INPUT RATINGS
ELECTRICAL WIRING
HP
1 1/2
1 1/2
1 1/2
1 1/2
kW
1.12
1.12
1.12
1.12