User`s manual

9
Changing the Tuner Signal Type
Press the Green Button to return to the main menu and browse the Settings section and select TV.
Next choose Setup TV Signal.
Note: Doing this will disrupt any scheduled recordings you may have previously set.
Starting The Media Center For The First Time
Chapter 1 - Introduction
When you start the Media Center Software for the first time, the software is going to ask you to
configure your setup. You will need to have all your connections in place before starting the
Configuration Wizard. Make sure that you have the IR Blaster (#15) connected to the Remote
Sensor (#14) before proceeding.
Press the Green Button and the Welcome Menu should appear asking you to start the Media
Center Setup.
Click Next and follow the onscreen prompts and the Wizard will guide you through configuring your
Media Center.
When you are finished with the configuration wizard, you can press the Live TV button and start
watching or recording live TV.
Note:
The Media Center Remote is NOT a
universal remote control and you cannot
program it to control all the devices in your
entertainment center. However, as new
Remote Control devices are becoming more
available, you will be able to use them
instead of the current one being used.
INTRODUCTION
For more information, visit CISNET Web Site at http://www.cisnetpc.com or cal 1-888-984-8899