Specifications

7-4
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 7 Upgrading Field-Programmable Devices
Upgrading SPA FPD Images
Displaying Information About the FPD Image Package
You can use the show fpd package command to find out which SPAs are supported with your current
Cisco IOS XR software release, which FPD image package you need for each SPA and what the
minimum hardware requirements are for the SPA modules.
RP/0/0/CPU0:ios(admin)# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
SW Min Req
Card Type FPD Description Type Subtype Version HW Vers
==================== ========================== ==== ======= =========== =======
Jacket Card SPA FPGA swv13 lc fpga 0.13 0.0
--------------------------------------------------------------------------------
SPA-4XOC3POS SPA FPGA swv13 spa fpga 0.13 0.0
SPA FPGA swv13 hwv2 spa fpga 0.13 2.0
--------------------------------------------------------------------------------
SPA-OC192POS-XFP SPA FPGA swv13 spa fpga 0.13 0.0
SPA FPGA swv13 hwv2 spa fpga 0.13 2.0
--------------------------------------------------------------------------------
SPA-8X1GE SPA FPGA swv1.8 spa fpga 1.8 0.0
--------------------------------------------------------------------------------
Table 7-2 describes the significant fields shown in the display.
SPA FPD Image Upgrade
To determine which FPD images on a SPA require an upgrade, the system compares the current FPD
image version for each individual SPA in the router with the minimum required FPD version required by
the current Cisco IOS software release. An FPD upgrade is required if at least one FPD image on one of
the SPAs in the router does not meet the minimum version requirements for that particular Cisco IOS XR
software image.
Typical reasons to upgrade FPD images include:
• Migrating to a newer Cisco IOS XR software release
After you migrate to a new Cisco IOS XR software release, the system notifies you to if it is
necessary to perform an upgrade.
Table 7-2 show fpd package Field Descriptions
Field Description
Card Type Module part number.
FPD Description Description of all FPD images available for the SPA.
Type Hardware type can be: spa—shared port adapter; lc—line card.
Subtype FPD type can be: fabldr—fabric downloader; fpga—field-programmable gate
array; rommon—read-only memory monitor
SW Version FPD software version required for the associated module running the current
Cisco IOS XR software.
Min Req HW Vers Minimum required hardware version for the associated FPD image.