Specifications
7-3
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 7 Upgrading Field-Programmable Devices
Upgrading SPA FPD Images
The following examples show the output when using this command.
The output display in this example shows that FPD versions on the SPA in the system do not meet the
minimum requirements. The output contains a “NOTES” section that states how to upgrade the SPA’s
FPD image.
RP/0/0/CPU0:ios# show hw-module fpd location all
=============================== ================================================
Existing Field Programmable Devices
================================================
Current SW HW Upg/
Location Card Type Type Subtype Inst Version Version Dng?
============ ======================== ==== ======= ==== =========== ======= ====
0/2/CPU0 Jacket Card lc fpga 0 0.1 0.34 Yes
--------------------------------------------------------------------------------
0/2/0 SPA-8X1GE spa fpga 0 0.16 1.0 Yes
--------------------------------------------------------------------------------
0/2/4 SPA-4XOC3POS spa fpga 4 3.4 1.0 Yes
--------------------------------------------------------------------------------
0/2/1 SPA-4XOC3POS spa fpga 1 3.4 1.0 Yes
--------------------------------------------------------------------------------
0/2/3 SPA-OC192POS-XFP spa fpga 3 1.2 2.1 Yes
--------------------------------------------------------------------------------
0/3/CPU0 Jacket Card lc fpga 0 0.1 0.34 Yes
--------------------------------------------------------------------------------
0/3/1 SPA-8X1GE spa fpga 1 0.16 1.0 Yes
--------------------------------------------------------------------------------
NOTES:
1. One or more FPD needs an upgrade or a downgrade. This can be accomplished
using the "admin upgrade hw-module fpd" CLI.
Table 7-1 describes the significant fields shown in the display.
Table 7-1 show hw-module fpd Field Descriptions
Field Description
Location Location of the module in the rack/slot/module notation.
Card Type Module part number.
Type Hardware type can be: spa—shared port adapter; lc—line card.
Subtype FPD type can be: fabldr—fabric downloader; fpga—field-programmable gate
array; rommon—read-only memory monitor
Inst Instance—A unique identifier that is used by the FPD process to register an FPD.
Current SW
Vers ion
Currently running FPD image version.
Min Req HW
Vers
Minimum required hardware version for the associated FPD image.
Upg/Dng Specifies whether an FPD upgrade or downgrade is required. A downgrade will be
required in rare cases when the version of the FPD image has a higher major
revision than the version of the FPD image in the current Cisco IOS XR software
package.