Specifications

5-6
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 5 Overview of Packet over SONET SPAs
Displaying the SPA Hardware Type
Example of the show hw-module Command
The following example shows output from the show hw-module subslot brief command on a Cisco XR
12000 Series Router with a 1-Port OC-192c/STM-64 POS/RPR XFP SPA installed in subslot 0:
RP/0/0/CPU0:x-21#show hw-module subslot 0/3/cpu0 brief
Subslot 0/3/0 brief info:
-----------------------
SPA inserted: YES
SPA type: 1xOC192 POS/RPR HHSPA with XFP
SPA operational state: READY
SPA cfg admin up: YES
Subslot 0/3/1 brief info:
-----------------------
SPA inserted: YES
SPA type: 1x10GE XFP SPA
SPA operational state: READY
SPA cfg admin up: YES
Table 5-4 describes the significant fields shown in the display.
Table 5-4 show hw-module subslot brief Field Descriptions
Field Description
SPA inserted Indicates if a SPA is currently detected in the subslot.
SPA type Description of SPA including the technology type, number of
ports, height of SPA (HHSPA—single height,
FHSPA—double height), and optics type.
SPA operational state Current state of the SPA module.
SPA cfg admin up Configured state of the SPA: YES—the SPA is not shut down,
NO—the SPA is shut down.