Specifications

2-6
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 2 Overview of the Cisco XR 12000 Series Router SIPs
Displaying the SPA Hardware Type
• SONET Traps
• Syslog Trap Alert on DLCI loss
• TCP MIB
• UDP MIB
• WRED MIB
To locate and download MIBs for selected platforms, Cisco IOS-XR releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
If Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list of
supported MIBs and download MIBs from the Cisco MIBs page at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
To access Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost your
account information, send a blank e-mail to [e-mail]. An automatic check will verify
that your e-mail address is registered with Cisco.com. If the check is successful, account details with a
new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com
by following the directions found at this URL:
http://www.cisco.com/register
Displaying the SPA Hardware Type
To verify the SPA hardware type that is installed in your Cisco XR 12000 Series Router, you can use the
show inventory command.
Table 2-2 shows the hardware description that appears in the show command output for each type of SPA
that is supported on the Cisco XR 12000 Series Router.
Table 2-2 SPA Hardware Descriptions in show Commands
SPA Description in show inventory Command
1-Port 10-Gigabit Ethernet SPA SPA-1XTENGE-XFP
5-Port Gigabit Ethernet SPA SPA-5XTENGE-XFP
10-Port Gigabit Ethernet SPA SPA-10XGE-XFP
1-Port OC-192c/STM-64 POS/RPR XFP SPA SPA-OC192POS