Specifications

10-24
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
upgrade hw-module fpd
upgrade hw-module fpd
To manually upgrade the current field-programmable device (FPD) image package on a module, use the
upgrade hw-module fpd command in admin EXEC mode.
upgrade hw-module fpd {all | fabldr | fpga-type | rommon} [force] location [all | node-id]
[reload]
Syntax Description
Defaults No default behavior or values
Command Modes Admin EXEC
Command History
all Upgrades all FPD images on the selected module.
fabldr Upgrades the fabric-downloader image on the module.
fpga-type Upgrades a specific field-programmable gate array (FPGA) image on
the module. Use the show fpd package command to view all available
FPGA images available for a specific module.
rommon Upgrades the rommon on the module.
force (Optional) Forces the update of the indicated FPD image package on a
SPA that meets the minimum version requirements. Without this option,
the manual upgrade upgrades only incompatible FPD images.
location Specifies the location of the module.
all (Optional) Upgrades the FPD image of all modules in the router.
node-id (Optional) Location of the module. Naming notation is rack/slot/subslot
and a slash between values is required as part of the notation.
• rack: Chassis number of the rack.
• slot: Physical slot number of the SPA interface processor (SIP).
• subslot: Subslot number of the SPA.
For more information about the syntax for the router, use the question
mark (?) online help function.
reload Reloads the module after the FPD image has been updated. If you do not
use the reload keyword, you must manually reload the module before
the FPD upgrade is complete. Use the hw-module node reload or
hw-module subslot reload EXEC command to reload the module.
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.
Release 3.3 The reload keyword was added.
Support for multiple FPGA images was added.