Specifications

10-23
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show hw-module subslot status
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Enter the command show platform to display the nodes on the router.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot status command to obtain status information about an interface on
the SPA.
Examples The following example shows sample output from the show hw-module subslot status command with
the temperature-sensor keyword:
RP/0/RP0/CPU0:ios# show hw-module subslot 0/2/cpu0 status temperature-sensor
SPA device temperature-sensor index 0 subindex 0 info:
DS1631 (0x0803c2e4) device status:
temperature = 0x1c80 (28.5 degree C)
SPA device temperature-sensor index 0 subindex 0 info:
DS1631 (0x08063bec) device status:
temperature = 0x1e00 (30.0 degree C)
Related Commands
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.
Command Description
show controllers Displays the controller type and other information.