Specifications

10-19
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show hw-module subslot errors
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Enter the command show platform to display the nodes on the router.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot errors command to display error information related to the specified
internal hardware device on a SPA.
Examples The following is sample output from the show hw-module subslot errors command with the
pluggable-optics keyword:
RP/0/RP0/CPU0:ios# show hw-module subslot 0/2/cpu0 errors pluggable-optics
SPA device pluggable-optics index 0 subindex 0 info:
Phased Initialization
Phase Reached: 4
Phase Exit Code: 0
Phase Read Offset: 256
Socket Verification
Not supported
SPA device pluggable-optics index 0 subindex 0 info:
Phased Initialization
Phase Reached: 2
Phase Exit Code: 3
Phase Read Offset: 256
Socket Verification
Not supported
Related Commands
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.
Command Description
show controllers Displays the controller type and other information.