Specifications

10-17
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show hw-module subslot counters
The following is sample output from the show hw-module subslot counters command with the framer
keyword:
RP/0/RP0/CPU0:ios# show hw-module subslot counters framer
SPA device framer index 0 subindex 0 info:
Milan Framer counters:
STREAM 0
Rx Bytes (48-bit) (#0x381fa078-0x883c): 163857232569448
Rx Good Bytes (48-bit) (#0x381fa080-0x8840): 1964924
Rx Good Packets (48-bit) (#0x381fa040-0x8820): 26234
Tx Byte Cnt Reg (48-bit) (#0x381fe070-0xa838): 9375380
Tx Good Bytes Cnt Reg (48-bit) (#0x381fe068-0xa834): 8909442
Tx Transmitted Packet Cnt Reg (48-bit) (#0x381fe040-0xa820): 114692
SPA last time ready Time the SPA module last changed state to up or ready (the
last time the module was loaded or reloaded).
SPA uptime The time in service or amount of time since the module was
last out of service due to a reload, power-cycle, or
configuration event.
Table 10-5 show hw-module subslot counters Field Descriptions (continued)
Field Description