Specifications

10-14
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show hw-module subslot config
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Enter the command show platform to display the nodes on the router.
You can also enter a partially qualified location specifier by using the wildcard (*) character. For
example, 0/1/* would display information for all modules on slot 1 in rack 0.
Use the show hw-module subslot config command to obtain diagnostic information about the
configuration of an interface on the SPA.
Examples The following is sample output for the show hw-module subslot config command:
RP/0/RP0/CPU0:ios# show hw-module subslot 0/2/cpu0 config
BAY 0 config info:
-------------------
SPA inserted: YES
SPA cfg admin up: YES
SPA cfg power up: YES
BAY 1 config info:
-------------------
SPA inserted: YES
SPA cfg admin up: YES
SPA cfg power up: YES
Table 10-4 describes the significant fields shown in the display.
Related Commands
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.
Table 10-4 show hw-module subslot config Field Descriptions
Field Description
SPA inserted Indicates if a SPA is currently detected in the subslot.
SPA cfg admin up Configured state of the SPA: YES—the SPA is not shut down,
NO—the SPA is shut down.
SPA cfg power up Indicates whether or not the subslot is currently configured as
powered.
Command Description
show controllers Displays the controller type and other information.