Specifications

10-9
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show hw-module fpd
1. One or more FPD needs an upgrade or a downgrade. This can be accomplished using the
"admin upgrade hw-module fpd" CLI.
Table 10-2 describes the significant fields shown in the display.
Related Commands
Table 10-2 show hw-module fpd Field Descriptions
Field Description
Location Location of the module in the rack/slot/module notation.
Card Type Module part number.
Type Hardware type can be: spa—shared port adapter; lc—line card.
Subtype FPD type can be: fabldr—fabric downloader; fpga—field-programmable gate
array; rommon—read-only memory monitor
Inst Instance—A unique identifier that is used by the FPD process to register an FPD.
Current SW
Vers ion
Currently running FPD image version.
Min Req HW
Vers
Minimum required hardware version for the associated FPD image.
Upg/Dng Specifies whether an FPD upgrade or downgrade is required. A downgrade is
required in rare cases in which the version of the FPD image has a higher major
revision than the version of the FPD image in the current Cisco IOS XR software
package.
Command Description
show fpd package Displays which FPD image package is needed for the router to properly
support the modules for the running Cisco IOS XR software release.
upgrade hw-module
fpd
Manually upgrades the current FPD image package on a module.