Specifications

10-8
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show hw-module fpd
show hw-module fpd
To display field-programmable device (FPD) compatibility for all modules or a specific module, use the
show hw-module fpd command in EXEC mode.
show hw-module fpd location [all | node-id]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Examples The following example shows how to display FPD compatibility for a specific module. Because the
current field-programmable gate array (FPGA) image needs to be upgraded, a note is displayed at the
end of the output:
RP/0/RP0/CPU0:Router# show hw-module fpd location 0/3/1
=============================== ================================================
Existing Field Programmable Devices
================================================
Current SW HW Upg/
Location Card Type Type Subtype Inst Version Version Dng?
============ ======================== ==== ======= ==== =========== ======= ====
0/3/1 SPA-1XTENGE-XFP spa fpga 1 0.17 2.0 Yes
--------------------------------------------------------------------------------
NOTES:
location Specifies the location of the module.
all Upgrades the FPD image of all modules in the router.
node-id Location of the module. Naming notation is rack/slot/subslot and a slash
between values is required as part of the notation.
• rack: Chassis number of the rack.
• slot: Physical slot number of the SPA interface processor (SIP).
• subslot: Subslot number of the SPA.
For more information about the syntax for the router, use the question
mark (?) online help function.
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.