Specifications

10-6
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
show fpd package
show fpd package
To display which field-programmable device (FPD) image package is needed for the router to properly
support the modules for the running Cisco IOS XR software release, use the show fpd package
command in admin EXEC mode.
show fpd package
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes Admin EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show fpd package command to determine which FPD image should be running on the module
installed in your system.
Examples The following example shows how to display FPD image information:
RP/0/RP0/CPU0:Router(admin)# show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
SW Min Req
Card Type FPD Description Type Subtype Version HW Vers
==================== ========================== ==== ======= =========== =======
SPA-OC192RPR-XFP SPA FPGA swv1.2 spa fpga 1.2 0.0
--------------------------------------------------------------------------------
SPA-OC192POS-XFP SPA FPGA swv1.2 spa fpga 1.2 0.0
SPA FPGA swv1.2 hwv2 spa fpga 1.2 2.0
--------------------------------------------------------------------------------
SPA-10X1GE SPA FPGA swv1.6 spa fpga 1.6 0.0
--------------------------------------------------------------------------------
SPA-5X1GE SPA FPGA swv1.6 spa fpga 1.6 0.0
--------------------------------------------------------------------------------
SPA-1XTENGE-XFP SPA FPGA swv1.6 spa fpga 1.6 0.0
--------------------------------------------------------------------------------
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.