Specifications

10-3
Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2
Release 3.2, OL-6396-01, Rev.A1 January 9, 2006
Chapter 10 Command Reference
hw-module subslot reload
hw-module subslot reload
To reload Cisco IOS XR software on a specific subslot, use the hw-module subslot reload command in
EXEC mode.
hw-module subslot subslot-id reload
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services
on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
The hw-module subslot reload command reloads Cisco IOS XR software on the specified SPA and
restarts the SPA interfaces. The SPA reloads with the current running configuration and active software
set for the SPA.
Examples The following example shows how to restart the SPA in slot 2, subslot 1:
RP/0/RP0/CPU0:GRP-7-TOP# hw-module subslot 0/2/1 reload
Related Commands
subslot-id Specifies the subslot to be restarted. Naming notation is rack/slot/subslot and
a slash between values is required as part of the notation.
• rack: Chassis number of the rack.
• slot: Physical slot number of the SPA interface processor (SIP).
• subslot: Subslot number of the SPA.
For more information about the syntax for the router, use the question mark
(?) online help function.
Release Modification
Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the
Cisco 12000 Series Router.
Command Description
hw-module subslot power-cycle Power-cycles a SPA module.