Specifications

10-2

Cisco XR 12000 Series Router SIP and SPA Software Configuration Guide, Release 3.2

Release 3.2, OL-6396-01, Rev.A1 January 9, 2006

Chapter 10 Command Reference

hw-module subslot power-cycle

To power-cycle the subslot and reload Cisco IOS XR software, use the hw-module subslot power-cycle

command in EXEC mode.

hw-module subslot subslot-id power-cycle

Syntax Description

Defaults No default behavior or values

Command Modes EXEC

Command History

Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper

task IDs. For detailed information about user groups and task IDs, refer to the Configuring AAA Services

on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

The hw-module subslot power-cycle command power-cycles the subslot (including the installed SPA).

Examples The following example shows how to power-cycle the SPA in slot 2, subslot 1:

RP/0/RP0/CPU0:router# hw-module subslot 0/2/1 power-cycle

Related Commands

subslot-id Specifies the subslot to be power-cycled. Naming notation is

rack/slot/subslot and a slash between values is required as part of the

notation.

• rack: Chassis number of the rack.

• slot: Physical slot number of the SPA interface processor (SIP).

• subslot: Subslot number of the SPA.

For more information about the syntax for the router, use the question mark

(?) online help function.

Release Modification

Release 3.2 This command was introduced on the Cisco XR 12000 Series Router and the

Cisco 12000 Series Router.

Command Description

hw-module subslot

reload

Reloads the Cisco IOS XR software on a specific SPA module.