User guide

Chapter 2
Setting Up and Mounting the Camera
8
Wireless-G Internet Home Monitoring Camera
Review the Camera’s settings. To make changes to the
settings, click Back to go back to the previous screen.
If the settings are correct, click Save to continue.
Save the Camera Settings
When the Wizard informs you that the new Camera
settings have been saved, click Continue.
Disconnect the power from the camera. Click Next.
Disconnect the Power
Disconnect the network cable from the Camera and
from your switch or router. Click Next.
Disconnect the Network Cable
14.
15.
16.
17.
Reconnect the power to the Camera. Click Next.
Reconnect the Power
The Setup Wizard displays Camera successfully
connected to network. Click Continue, then click
Next on the following screen.
Camera Successfully Connected to Network
Camera Connected to Wireless Network
The Congratulations screen appears.
Install Camera Utility Click this to install the Camera’s
Utility.
Online Registration Click this to register your Camera
online.
Exit Click this to exit the Setup Wizard and install the
Camera’s utility later.
Go to the “Placement Options” section.
18.
19.
20.
•
•
•