User guide

Chapter 4
Advanced Configuration with the Web-based Utility
27
Wireless-G Internet Home Monitoring Camera
New Motion Trigger Schedule
This section allows you to create a schedule that
determines when motion detection will be active. To do
this, you define one or more “trigger” events, or periods
during which motion detection will be in effect. For each
trigger event, fill in the following fields.
Trigger Motion Detection Specify how often this trigger
event occurs: Every day, Weekdays (Mon - Fri), or on
specific days of the week (Sunday to Saturday).
Start Time and End Time Select the starting and ending
times for the event.
Add Click Add to add the new event to the schedule.
Clear Click Clear to clear the schedule of all events.
Delete To delete an event from the Schedule List, select
the event, then click Delete.
Schedule List This displays all of the scheduled trigger
events that you have defined and saved. It is empty by
default.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
Setup > Status
The Setup > Status screen allows you to view the Camera’s
status information and log.
Setup > Status Screen
System Status
Firmware Version The version of the current firmware
installed.
MAC Address The MAC Address of the Camera is
displayed here.
Camera Name The name you gave to the Camera is
displayed here.
Description Information about the Camera, such as
location, is displayed here.
Date/Time The current date and time are shown here.
Network
Network Type The wireless network’s mode is shown
here.
IP Address The Camera’s IP Address is displayed here.
Subnet Mask The Camera’s Subnet Mask is shown here.
Gateway The Camera’s Gateway address is displayed
here.
Wireless
SSID The wireless network’s SSID or name is shown here.
Channel No The wireless network’s channel setting is
displayed here.
Security The wireless network’s encryption level is shown
here.
Log
System Log This shows the Camera’s activities. To empty
the log, click Clear Log.
To get the Camera’s most up-to-date information, click
Refresh. To get additional information about the screen’s
features, click Help.
Help
Through the Help screen, you’ll find links to additional
resources for the Camera and its Utility. If you select the
Help tab directly from the Welcome screen, then you will
see the User Help screen and will only be able to access
these resources. If you first log in to access the Camera’s
Setup and then select the Help tab, you will see the
Administrator Help screen and will be able to restore
factory defaults and upgrade the Camera’s firmware.
Setup > Help Screen
Setup Click any of the topics in the bar on the left to
get help information.
•