User guide

WVC200-210 User Guide 41
Status
Configuring Software
Status
Clicking on the Status Tab shows options for System, Image, Network, Wireless, Syslog, and
Log.
This is a scrolling window, the top half appears as follows:
System
• Firmware Version — The version of the firmware currently installed is displayed.
• MAC Address — This displays the MAC address of the camera.
• Camera Name — This displays the name of the camera, as defined on the Basic > Device
Settings screen.
• Description — This displays the description of the camera, as defined on the Basic >
Device Settings screen.
• Date/Time — This displays the current date/time as configured on the camera.
Image
•MPEG-4
– Resolution — This displays the image size of the video stream.
– Image Quality — This displays the image quality of the video stream.
– Frame Rate — This displays the frame rate of the video stream.
•MJPEG