User guide

WVC200-210 User Guide 40
Pan/Tilt
Configuring Software
• Set Home Button— Set the desired position and then click this button to set Home
position.
• Current Position — Name the current desired position and then click the Add button
to add into the preset list.
• Preset Position— Select the preset position you don't need and then click the Delete
button to remove.
Pan/Tilt Control
Pan/Tilt Control and Rotation Sequence are found at the lower part of the scrolling window.
• Pan/Tilt Movement — Check On if you want to use the Pan/Tilt Movement feature.
• Default Home Position — Click this button to reset Default Home Position.
Rotation Sequence
• Rotation Sequence Windows — This feature determines how the camera will move
when it is set to "Rotate". You can set a number of Preset Positions; the camera will go to
the first position, then move through the list of preset positions until it is finished. The
camera will stop at the last position in the list.
– To create the Preset Sequence, select the desired Preset Position in the left column,
and click the Add >> button. Repeat until the desired sequence is complete. Note
that you can add the same Preset Position more than once; this can be used to make
the camera stay longer at one position.
– To delete a position from the Sequence, select the desired position and click the
Delete button.
• Time — This determines how long the camera will stay at each position while executing
the sequence. Set this to the desired value.