User guide

WVC200-210 User Guide 39
Pan/Tilt
Configuring Software
• Frame Rate— Defaults to 1 fps
• Pre-Capture Length — Defaults to 1 second
• Post Capture Length — Defaults to 1 second
Pan/Tilt
• This option is only available if your camera is fitted with a Pan/Tilt control. If available,
select the desired option to resolve conflict between the Pan/Tilt and Motion Detection
features.
• Check the box to set the idle time for motion detection position, this defaults to 1
minute.
• Set Area & Sensitivity — Click this button to enter the motion detection sub-screen.
You can set the area or areas of the video image to be examined, and adjust the
sensitivity of detection for each area.
Pan/Tilt
Clicking on Pan/Tilt shows the Set Preset, Pan/Tilt Control, and Rotation Sequence settings
for the camera.
Set Preset
• Set Positions — Set the desired position through adjusting the control panel.
• Calibrate Button — Click this button to reset the calibration of Pan/Tilt area.
NOTE: Motion detection can be triggered by rapid
changes in lighting conditions, as well as by moving
objects. For this reason, it should only be used indoors.