User guide

WVC200-210 User Guide 38
Motion Detection
Configuring Software
• FTP Server — Enter the address of the secondary FTP Server.
• Login Name — Enter the login name associated with the secondary FTP server.
• Password — Enter the password associated with the login name for the secondary FTP
server.
• Enable Passive Mode — Check the box to enable the Passive mode feature.
• File Path Name — Enter the desired file path name on the secondary FTP server.
Motion Detection
Clicking on the Motion Detection Tab shows options for Event and Pan/Tilt.
Event
• Enable E-mail Alert — If enabled, e-mail alert with attachment are sent when motion is
detected.
• Enable FTP Alert — If enabled, FTP alert with attachment are sent when motion is
detected.
Checking either alert box will display options for the attachment.
•Interval — Defaults to 2 minutes before detecting the next event
• Attachment Type — JPEG Image or Video
NOTE: Complete the Mail and FTP Setup prior to enabling
alerts.