User guide

WVC200-210 User Guide 37
Mail & FTP
Configuring Software
Secondary SMTP
• Secondary SMTP — Check the box to upload to the Secondary SMTP if the camera can
not connect to the primary SMTP.
• SMTP Mail Server — Enter the address of the SMTP (Simple Mail Transport Protocol)
Server to be used to send e-mail.
• Port — Enter the port number for the mail server, the default is 25.
• Authentication — Check the box if your mail server requires authentication and enter
the following options:
– Account Name— Enter the account name to be used on the email server.
– Password — Enter the password associated with the account name.
E-mail Setup
• Send To — Enter at least one (1) e-mail address; the 2nd and 3rd addresses are optional.
The e-mail alert will be sent to the e-mail address or addresses specified here.
• Show “From” as — Enter the e-mail address to be shown in the From field when the e-
mail is received.
• Subject — Enter the desired text to be shown as the subject for the e-mail when it is
received
FTP Alert
Primary FTP
• FTP Server — Enter the address of the primary FTP Server.
• Login Name — Enter the login name associated with the specified primary FTP server.
• Password — Enter the password associated with the login name for the primary FTP
server.
• Enable Passive Mode — Check the box to enable the Passive mode feature. (This is a
more secure mode of the ftp protocol)
• File Path Name — Enter the desired file path name on the primary FTP server.
Secondary FTP
• Secondary FTP — Enable this option to allow the camera to connect to a secondary
FTP server if the primary FTP server is not available
NOTE: Only one FTP server is used, even if both the
primary and secondary FTP servers are enabled.