User guide

WVC200-210 User Guide 36
Mail & FTP
Configuring Software
• Check WAN IP Address — This option allows you to set how often the device should
check to see if the Internet IP address has changed. If the IP address has changed, the
DDNS Server will be notified.
Mail & FTP
Clicking on the Mail & FTP Tab shows options for E-mail Alert and FTP Alert.
E-mail Alert
Primary SMTP Server
• SMTP Mail Server — Enter the address of the SMTP (Simple Mail Transport Protocol)
Server to be used to send e-mail.
• Port — Enter the port number for the mail server, the default is 25.
• Authentication — Check the box if your mail server requires authentication and enter
the following options:
– Account Name— Enter the account name to be used on the email server.
– Password — Enter the password associated with the account name.
NOTE: To complete the DDNS Service setup, port
forwarding needs to be configured on your router.
NOTE: Only one SMTP server is used, even if both the
primary and secondary SMTP servers are enabled.