User guide

WVC200-210 User Guide 25
Basic
Configuring Software
Basic
Clicking on the Basic Tab shows the Basic Settings, Device Settings, Network Settings,
RTSP/RTP, Wireless Settings, and Other settings for the camera.
Device Settings
• Device ID — This displays the ID for the camera. This is used by the setup wizard, viewer
and the recorder utility to identify the camera.
• Camera Name — Enter the preferred name for the camera. The camera name must not
exceed 15 alphanumeric characters.
• Description — This field is used for entering a description, such as the location of the
camera. Entering a description will help you identify the camera. It must not exceed 32
alphanumeric characters.
• Enable LCD and LED Operations — Enable this if you want to turn on the LCD or LED.
• Current Date/Time — It displays the current date and time. If it’s not correct, click the
Change button to modify the time settings.
Set Date/Time
• PC’s Date and Time — Displays the current time of the PC connected to the web-based
utility.
• Camera Date and Time — Displays the current time as configured on the camera.
• Sync with PC— Allows you to synchronize the camera to the clock on the PC connected
to the web.based utility.
• New Date — Allows you to manually enter the date for the camera.