User guide

WVC200-210 User Guide 22
7
Home
Configuring Software
Configuring Software
This section describes the basic functions of the camera software. For more advanced
information, please see the Linksys Video Surveillance Application User Guide.
To determine if you have a DHCP server on your network, consult your network administrator. If
you do not have a DHCP server, access your camera through the default IP address.
Open your web browser and enter the assigned IP address in Address field in the following
format:
http://192.168.1.99
Press the Enter key and the Login screen will appear. The first time you open the web based
utility, enter admin (the default user name) in the User name field and leave the password
blank. Click the OK button. You can set a password later from the
Setup > Users screen.
Home
The Home screen is the first screen that is displayed. The Home screen identifies the camera
type in the upper right hand corner, and has tabs across the top of the screen labeled View
Video, Setup, Linksys Web, and Exit.
NOTE: By default the camera is set to receive an IP address
from a DHCP server. If you do not have a DHCP server on
your network, you can set a static IP address by pressing
the Reset button on the camera for less than 10 seconds.
A default IP address of 192.168.1.99 will be assigned to the
camera..