User guide

WVC200-210 User Guide 15
5
Upgrading Firmware
Upgrading Firmware
The camera ships with the firmware release of 1.0.0. The camera's firmware is upgraded
through the Web-based Utility's Maintenance tab. Follow these instructions:
1. Download the firmware from Linksys’s website at www.linksys.com.
2. Extract the file.
3. Access the camera’s Web-based Utility, and click the Maintenance tab.
4. On the Maintenance screen, click the Firmware Upgrade button.
5. Click the Browse button to find the extracted file, and then double-click the filename.
6. Click the Start Upgrade button, and follow the on-screen instructions. Click the Cancel
button to cancel the firmware upgrade. For more information, click the Help button.
NOTE: Linksys recommends that you upgrade the
camera’s firmware within your network; in other words,
use a computer within the camera’s local network. If you
attempt to upgrade the camera’s firmware from a remote
location—using a computer outside of the camera’s local
network—the upgrade may fail.