User guide

WVC200-210 User Guide 8
Camera Ports and Button
Getting to Know the PTZ Internet Camera
WVC210 Bottom
WVC200 Back
Camera Ports and Button
The camera features three ports and a Reset button on the bottom panel.
NOTE: Resetting the camera will erase all of your settings,
such as encryption information, and replace them with
the factory defaults. Do not reset the camera if you want
to retain these settings.
Port/Button Description
POWER This port is where you will connect the 5V power adapter.
MIC IN This port is where you will connect the 3.5 mm input jack of your external
microphone (optional).
LAN This port is where you will connect the Ethernet network cable.
RESET This button is what you will press if you need to reset the camera. Insert a
paper clip into the opening next to the Ethernet port. Then press the button
and hold it in for five seconds. Be aware that this will erase all of your settings
and return the camera to factory defaults