Datasheet

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 18 of 20
• CISCO-ENTITY-FRU-CONTROL-MIB
• CISCO-COPS-CLIENT-MIB
• ENTITY-MIB (RFC 2037)
• HC-RMON
• RFC1213-MIB (MIB-II)
• SMON-MIB
Inline-Power Specifications
• IEEE 802-3af – Output power per port: Typically 54V up to 350 mA
• Cisco Prestandard – Output power per port: Typically 42V up to 166 mA
• Pin assignment: 1, 2, 3, and 6
Maximum Station-to-Station Cabling Distance
• 10/100BASE-TX, 100BASE-TX Fast Ethernet, and 10, 100, and 1000 Mbps: Category 5, 5e, and 6 UTP: 328 ft (100m), 100-ohm STP: 328 ft
(100m); half or full duplex
• Maximum power: Off (maximum power condition not reached); on (maximum power condition reached; no more phones will receive inline power
from this module)
Indicators and Interfaces
• Status: Green (operational); red (faulty); orange (module booting or running diagnostics)
• Link good: Green (port active); orange (disabled); off (not active or not connected); blinking orange (failed diagnostic and disabled)
• 10, 100, and 1000 Mbps: RJ-45 (female)
• 10/100BASE-TX and 100BASE-TX: RJ-45 (female)
SERVICE AND SUPPORT
Cisco offers a wide range of services programs to accelerate customer success. These innovative services programs are delivered through a unique
combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your
network investment, optimize network operations, and prepare the network for new applications to extend network intelligence and the power of your
business. For more information about Cisco Services, see
Cisco Technical Support Services or Cisco Advanced Services.
FOR MORE INFORMATION
For more information about the Cisco Catalyst 6500 Series Switch, contact your local account representative or visit:
http://www.cisco.com/en/US/products/hw/switches/ps708/index.html