Installation guide

1-71
Catalyst 6500 Series Switch Module Installation Guide
78-15725-02
Chapter 1 Product Overview
Content Switching Module (WS-X6066-SLB-APC)
Content Switching Module (WS-X6066-SLB-APC)
The Content Switching Module (WS-X6066-SLB-APC) provides
high-performance sessions between network devices and a server farm (a group
of network servers) based on Layer 4 through Layer 7 information packets. (See
Figure 1-46.) The module allows you to represent a group of servers (real servers)
as a single-server instance (virtual server), balance the traffic to the servers, and
limit traffic to individual servers.
Note Specific combinations of supervisor engines and modules may not be supported
in your chassis. Refer to the release notes of the software version running on your
system for specific information on modules and supervisor engine combinations
that are not supported.
Figure 1-46 Content Switching Module (WS-X6066-SLB-APC)
The STATUS LED displays the Content Switching Module status as described in
Table 1-17.
CSG
RJ-45 (Test)
connector
Status
LED
47525