Installation guide

Index
IN-8
Catalyst 6500 Series Switch Module Installation Guide
78-15725-02
rollover cable B-9
RX LED
ATM modules description (table)
1-51
S
SC connector
description
B-14
SC-type connector
GBIC interfaces
2-14
show module command 3-20
show port command 1-86, 3-20
SHUTDOWN button
NAM front panel (figure)
1-62
signaling requirements,
IEEE-recommended
2-1
SIGNAL LED
ATM modules description (table)
1-52
single mode fiber-optic cable 2-5
software requirements 2-26
specifications, environmental and physical
(table)
A-2
STATUS LED 1-57
ATM module description (table) 1-51
Ethernet and gigabit Ethernet module
description (table)
1-47
firewall service modules 1-65
FlexWAN modules 1-54
MSM module description (table) 1-57
Supervisor Engine 1
console port
1-13
console port mode switch 1-14
Flash PC cards 3-17
front panel features (figure) 1-11
LEDs 1-12
memory components 1-7
Reset button 1-13
STATUS LED 1-54, 1-57
Supervisor Engine 2
references to Supervisor Engine 1 and
Supervisor Engine 2 (note)
1-2
Supervisor Engine 720
chassis slot assignments
3-2
Compact Flash and MicroDrive 3-19
front panel (figure) 1-11
installation restrictions 1-10
LED descriptions 1-12
uplink ports 1-16
Supervisor Engine III
connecting a terminal
3-16
supervisor engine module, slot numbers 1-86
supervisor engine slot assignements (table) 3-3
switches
feature descriptions (table)
1-6
features supported 1-3, 1-4
See also specific switches (for example,
Catalyst 6506 switches
Switch Fabric Module 2
use in Catalyst 6513 switches
1-5