Installation guide

Appendix B Cable and Connector Specifications
Fiber-Optic Connectors
B-14
Catalyst 6500 Series Switch Module Installation Guide
78-15725-02
Fiber-Optic Connectors
This section describes the SC and MT-RJ fiber-optic connectors.
SC Connectors
Warning Invisible laser radiation may be emitted from disconnected fibers or
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
The SC single-mode (fiber) connector is used to connect fiber-optic module ports
with the external network.
(See Figure B-6.)
Figure B-6 SC Optical Connector
4 (GND) GND
5 (GND) GND
6 (TxD) Output
7 (DSR) Input
8 (CTS)
1
Input
1. Pin 1 is connected internally to Pin 8.
Table B-8 Console Port Pinouts (Port Mode Switch Out) (continued)
Console Port Console Device
H2214