Specifications
4-21
Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module Installation and Configuration Note
78-16413-01
Chapter 4 Administering the Network Analysis Module
Additional NAM Software Administrative Commands
Note If HTTP or the HTTP server are running, and you are running the NAM Traffic Analyzer web
application, click on the About link in the GUI to display a list of installed patches. If nothing
appears, no patches were installed.
This Catalyst operating system software example shows how to apply patch software:
Console> (enable) reset 3
This command will reset module 3.
Unsaved configuration on module 3 will be lost
Do you want to continue (y/n) [n]? y
ResetPcBlade:start shutdown module 4
SendShutDownMsg - proc_id (1):shut down PC success.
Module 3 shut down in progress, please don't remove module until shutdown completed.
Console> (enable) 2002 May 07 23:19:03 %SYS-5-MOD_OK:Module 3 is online
namlab-sup2# session slot 3 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.0.31 ... Open
Cisco Network Analysis Module (WS-SVC-NAM-1)
login: root
Password:
Terminal type: vt100
Cisco Network Analysis Module (WS-SVC-NAM-1) Console, 3.3(0.15)
Copyright (c) 1999-2004 by cisco Systems, Inc.
WARNING! Default password has not been changed!
root@namlab-kom3.cisco.com# patch
ftp://guest@namlab-pc1/home/guest/patch_rpms/nam-app.3-3.cryptoK9.patch.1-0.bin
Proceeding with installation. Please do not interrupt.
If installation is interrupted, please try again.
Downloading nam-app.3-3.cryptoK9.patch.1-0.bin. Please wait...
Password for guest@namlab-pc1:
ftp://guest@namlab-pc1/home/guest/patch_rpms/nam-app.3-3.cryptoK9.patch.1-0.bin (1K)
- [########################] 1K | 114.28K/s
1891 bytes transferred in 0.02 sec (112.09k/sec)
Verifying nam-app.3-3.cryptoK9.patch.1-0.bin. Please wait...
Patch nam-app.3-3.cryptoK9.patch.1-0.bin verified.
Applying /usr/local/nam/patch/workdir/nam-app.3-3.cryptoK9.patch.1-0.bin. Please wait...
########################################### [100%]
########################################### [100%]
Additional NAM Software Administrative Commands
Refer to the Catalyst 6500 Series and Cisco 7600 Series Network Analysis Module Command Reference
for information on NAM commands available through the NAM CLI.