Specifications

2-2
Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module Installation and Configuration Note
78-16413-01
Chapter 2 Installing the Network Analysis Module
Software Requirements
Software Requirements
Note Starting with maintenance image release 2.1(1), there is a single maintenance image for services
modules. Refer to this URL:
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-serv-maint
Table 2-1 lists the NAM software versions that are supported by the Catalyst operating system and
Cisco IOS software.
Hardware Requirements
Table 2-2 lists the NAM hardware versions that are supported by the Catalyst operating system and
Cisco IOS software.
Table 2-1 NAM Software Compatibility
Module
Application
Image
Maintenance
Image
Catalyst Operating
System Software Cisco IOS Software
Supported
Browsers
WS-SVC-NAM-1
WS-SVC-NAM-2
3.3(1) 1.1(1)m
2.1(1)
Release 7.3(1) or later
with Supervisor
Engine 1A or 2
Release 8.2(1) or later
with a WS-SUP720
Release 12.1(13)E
1
or later with a
Supervisor Engine 2
with an MSFC2
Release 12.1(19E)1
or later with a
Supervisor Engine
1A with an MSFC2
Release 12.2(14)SX1
with a WS-SUP720
1. If you are running a 12.1(13)E-based release, we recommend that you use a later 13E release, for example, use Release 12.1(13)E11 over 12.1(13)E3.
Netscape 7 or 7.1
on Windows 2000
and Solaris
Internet Explorer
5.0 and later on
Windows 2000
Table 2-2 NAM Hardware Compatibility
Module Catalyst Operating System Software Cisco IOS Software
WS-SVC-NAM-1
WS-SVC-NAM-2
Supervisor Engine 1A or 2 or
WS-SUP720
Supervisor Engine 2 with an MSFC2 or
WS-SUP720