Specifications

1-2
Catalyst 6500 Series Switch and Cisco 7600 Series Router Network Analysis Module Installation and Configuration Note
78-16413-01
Chapter 1 Overview
Before You Begin
To help you get started using the NAM, refer to this roadmap:
Getting Started with the NAM
Is the Catalyst 6500
series switch installed
on your network?
Begin to
install
the NAM
Install and
configure
the NAM
Configure
and use
the NAM
Traffic Analyzer
If you need information about
installing the Catalyst 6500
series switch, refer to the
following documentation.
Information about the NAM
in this release
Quick Setup instructions and
basic configuration
Installing and Removing
the NAM
This guide is part of the online help for the Traffic Analyzer.
To access the online help, point your web browser at the
NAM and click on the Help link in the upper right of the screen.
Configuring the NAM
Administering the NAM
Troubleshooting the NAM
Software and hardware
requirements for the NAM
Ye s
No
Catalyst 6500
Release
Notes
Catalyst 6500
Family
Installation
Guide
Release Notes for
Catalyst 6500 Series
Network Analysis
Module
Software Release
3.1
User Guide for the
Catalyst 6500 Series
Network Analysis
Module Traffic
Analyzer
Catalyst 6500 Series
Network Analysis
Module
Installation and
Configuration Note
Quick Start Guide
for the
Catalyst 6500 Series
and
Cisco 7600 Series
Network Analysis
Module
Catalyst 6500 Series
Network Analysis
Module
Command Reference
Software
Configuration
Guide
Quick
Configuration
Guide
Command
Reference
System
Message
Guide
Troubleshooting
Tips
Getting the Latest
Software Information
79164
Sessioning into the NAM
Setting up the IP address, host,
gateway, domain, name server
and SNMP information
Starting the web server on the
NAM (which starts the NAM Traffic
Analyzer application) and pointing
your web browser at the NAM you
want to configure.