Specifications

White Paper
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 33 of 89
Total packets: 2928324
IP shortcut packets: 1293840
Packets dropped by policing: 0
IP packets with TOS changed by policing: 423137
IP packets with COS changed by policing: 2
Non-IP packets with COS changed by policing: 0
MPLS packets with EXP changed by policing: 0
When QoS is enabled in the Catalyst 6500, the switch will set a series of QoS defaults for the switch. The global
defaults include the following settings:
Table 14—Summary of default states set when QoS is enabled
QoS Feature Default setting
Trust state of each port Un-trusted
Port CoS Default value Zero (0)
Microflow Policing Enabled
Intra VLAN Microflow Policing Disabled
QoS is Port based or VLAN based Port Based
CoS to DSCP Mapping
(DSCP set from CoS value)
CoS 0 = DSCP 0
CoS 1 = DSCP 8
CoS 2 = DSCP 16
CoS 3 = DSCP 24
CoS 4 = DSCP 32
CoS 5 = DSCP 40
CoS 6 = DSCP 48
CoS 7 = DSCP 56
IP Precedence to DSCP Map
(DSCP set from IP Precedence value)
IP precedence 0 = DSCP 0
IP precedence 1 = DSCP 8
IP precedence 2 = DSCP 16
IP precedence 3 = DSCP 24
IP precedence 4 = DSCP 32
IP precedence 5 = DSCP 40
IP precedence 6 = DSCP 48
IP precedence 7 = DSCP 56
DSCP to CoS map
(CoS set from DSCP values)
DSCP 0-7 = CoS 0
DSCP 8-15 = CoS 1
DSCP 16-23 = CoS 2
DSCP 24-31 = CoS 3
DSCP 32-39 = CoS 4
DSCP 40-47 = CoS 5
DSCP 48-55 = CoS 6
DSCP 56-63 = CoS 7
Policers None Enabled