Specifications

White Paper
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 25 of 89
Figure 18. Mapping Priority to Internal DSCP
This example map is an ingress map used to take either the CoS or IP Precedence value of an incoming frame and
map it to an internal DSCP value. The mapping used for a port can be viewed using the following command:
Cat6500# show queueing int f4/2
<snip>
Packets dropped on Transmit:
BPDU packets: 0
queue thresh dropped [cos-map]
---------------------------------------------------
1 1 0 [0 1 ]
1 2 0 [2 3 ]
2 1 0 [4 6 ]
2 2 0* [7 ]
3 1 0* [5 ]
* - shared transmit counter
Packets dropped on Receive:
BPDU packets: 0
queue thresh dropped [cos-map]
---------------------------------------------------
1 1 0 [0 1 ]
1 2 0 [2 3 ]
1 3 0 [4 6 ]
1 4 0* [7 ]
2 1 0* [5 ]
<snip>