User manual

8
Release Notes for Catalyst 6500 Series Content Switching Module Software Release 2.2(8)
78-12569-16
New and Changed Information
New and Changed Information
• The CSM runs on Cisco IOS Release 12.1.(13)E3 and is supported by the Supervisor Engine 1A or
Supervisor Engine 2 with an MSFC1 or MSFC2 and Catalyst operating system release 7.5.
• In the 2.2(7) release, the CSM now supports non-standard HTTP requests from the Wireless
Application Protocol (WAP) devices.
Stickiness
Cookie c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
SSL ID c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Source IP c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
HTTP redirection c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Redundancy
Sticky state c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Full stateful failover (connection redundancy) c6kslb-apc.2-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Health Checking
HTTP c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
ICMP c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Telnet c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
TCP c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
SMTP c6slb-apc.1-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
DNS c6kslb-apc.2-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Management
SNMP traps c6kslb-apc.2-1-1.bin SC6K-2.1-CSM
SC6K-2.2-CSM
Table 2 CSM Feature Set Description (continued)
Feature Image Filename
Orderable Software
Product Numbers