Datasheet

Catalyst 4900 Family Center Rack-Mount Kits Installation Note

OL-23774-01

Installing the WS-X4948E-19CNTR= or the WS-X4948E-23CNTR= Center Rack-Mount Kits

Figure 5 Removing the Standard Rack-Mount Brackets

Step 3 Verify that you have the correct center rack-mount kit for your chassis and for the equipment rack size.

Step 4 Open your center rack-mount kit and inventory the contents. See Table 3 for the kit contents and

quantities.

Step 5 Determine how you want to position the chassis in the equipment rack. The center rack-mount brackets

are reversible; they can be installed either on the front sides of the chassis or on the rear sides of the

chassis.

Step 6 Position one of the brackets against the side of the chassis with the bracket’s four mounting holes aligned

with the holes in the chassis as shown in Figure 6.

Step 7 Secure the bracket in place with four M4 mounting screws.

Step 8 Repeat step 6 and step 7 for the second bracket.

1 M4 screws (4 screws per bracket) 2 Standard 19-inch rack-mount bracket

207508