Datasheet

10
Catalyst 4900 Family Center Rack-Mount Kits Installation Note
OL-23774-01
Installing the WS-X4948-19CNTR= or the WS-X4948-23CNTR= Center Rack-Mount Kits
Step 10 While one person holds the chassis in place, secure the chassis to the equipment rack posts with either
the four 10-32 x 3/4-inch or the four 12-24 x 3/4-inch Phillips-head machine screws (two on each side)
that are supplied in the accessory kit.
Note If the equipment rack post-mounting holes are not threaded, you need to obtain the proper size
cage-nuts to secure the center rack-mount mounting screws in place.
Figure 3 Attaching the Chassis to the Equipment Rack
Step 11
If you want to install the optional cable guide bracket, position the cable guide against either the left- or
right-side threaded hole in the center rack-mount bracket as shown in Figure 4. Secure the cable guide
bracket in place with one M4 screw.
Note For complete chassis installation procedures and additional product information, refer to the installation
guide for your chassis.
Figure 4 Attaching the Optional Cable Guide Bracket to the Center Rack-Mount Bracket
CON
Catalyst 4948
MGT
45 46 47 48
STATUS
FAN
PS2
PS1
1
16
17
32
33
48
208734
CON
Catalyst 4948
MGT
45 46 47 48
STATUS
FAN
PS2
PS1
1
16
17
32
33
48
208735